
A washer that stops mid-cycle or a dryer that runs cold leaves you with wet clothes and a growing pile, and you should not lose a whole day getting it fixed. Plaza Appliance Service Co has repaired appliances for Charlotte-area households since 1952. Call for appliance repair in Cornelius, NC, and you get a two-hour arrival window and a technician who knows washers and dryers inside and out.
Laundry leads this page, but we repair the major kitchen appliances in your home as well.
Washer and dryer repair for Cornelius homes
Laundry problems announce themselves. The washer fills but never spins, or it leaves a puddle across the floor. The dryer tumbles for an hour and the towels come out damp. A pair squeezed into a hall closet adds a twist, because reaching the back of the machine is harder than it looks. Please leave it in place; dragging a washer or dryer out of a tight space can scrape the floor and damage the appliance.
Our washer and dryer repair service covers front-load and top-load washers, dryers, and side-by-side pairs. Give us the brand, the model number if it is easy to read, and what the machine is doing, and your technician knows what to look for before arriving. A frayed or scorched power cord means stop using the machine; we replace cords as part of a repair. We also clear the lint that collects inside the dryer cabinet, which helps the dryer run safely.
What the symptom usually points to
- Washer will not drain or spin: standing water usually traces to a blockage in the pump or drain hose, a failed pump, or a lid switch that keeps the cycle from moving on, while a load left soaking wet can also mean a worn belt or a motor or control problem. Testing tells which.
- Washer leaks or bangs: a cracked hose, a worn door gasket on a front loader, or a leaking pump are the usual leak suspects; an unbalanced load or worn suspension can shake a machine clear across the floor.
- Dryer runs but will not heat: a heating element, thermal fuse, or thermostat may have failed, or lint deep inside the cabinet may be holding the heat back.
- Dryer drum will not turn: a broken belt is a common cause, and a failed idler pulley or motor can do the same; you may hear the motor hum while nothing moves.
- Dryer takes two cycles: damp clothes after a full cycle point to weak heat or poor airflow inside the machine, and every second cycle costs electricity and wears parts faster.
Simple checks before you call
Make sure the machine is plugged in and the breaker has not tripped; an electric dryer runs on a double breaker, and if only one side trips the drum may turn with no heat. Close the lid or door fully and listen for the latch. Look for a child lock, delayed start, or pause setting, clean the lint screen, and if the load is one heavy comforter, spread it out and rerun the spin. If none of that changes anything, call us. Please do not pull the machine out, tip it, or take off any panel.
Helping your laundry pair last
Keep loads at the size the manual recommends; an overloaded washer strains the motor and suspension, and an overstuffed dryer never dries evenly. Empty the lint screen every load, use only the detergent the washer calls for, and leave a front-loader door ajar between loads so the gasket dries. When the dryer starts taking longer or running hot, call sooner rather than later; a small problem is a cheaper problem.
A two-hour window instead of a lost day
Nobody wants to sit home all day for a repair, so we schedule every Cornelius visit inside a two-hour appointment window and you plan around it. Same-day service is available when the schedule allows. To make the window go smoothly, clear a path to the laundry room or closet, move baskets off the machines, and jot down the model number from the label inside the door rim or under the lid.
Booking is by phone: call 704-366-2126 to set your window, or send the request form on our contact page and we phone you back to pick a time. Our hours: Monday through Friday, 7:00 AM to 6:00 PM; Saturday, 7:00 AM to 3:00 PM; Sunday, closed.
Appliance repair in Cornelius, room by room
- Laundry room: front-load and top-load washers, dryers, and the side-by-side pairs most laundry rooms are built around.
- Cold storage: refrigerator repair for standard and counter-depth models, plus freezers (upright ones included) and the ice maker inside your refrigerator. Warm milk, a frosted-over freezer, and a silent ice maker are all good reasons to call.
- Cooking: wall ovens, ranges, stoves, and cooktops through our oven, range, and cooktop repair service, plus over-the-range, built-in, and hood-combo microwaves. Slow preheating and burners that quit are typical.
- Cleanup: dishwasher repair, dishwasher cleaning, dishwasher filter service, and garbage disposals. Gritty dishes and a disposal that hums and stops both deserve a call.
- Upkeep: preventive maintenance and inspections, including refrigerator coil cleaning, safety checks, and lint cleaning inside the dryer, for appliances that still work and that you would like to keep working.
When to call us in Cornelius
Stop the machine and call right away if you smell burning near the dryer, if the dryer cabinet is hot while the clothes stay damp, or if water shows up on the floor around the washer. A machine that trips the breaker, grinds during spin, or stalls at the same point every cycle is also telling you it is time. Have the brand, the model number if you can read it, the symptom, and any error code ready, and tell us whether the pair is tucked in a closet so your technician comes prepared for the space.
What to expect from the visit
Your technician diagnoses the problem first. Before anything is replaced, you hear what failed and what the fix will cost, and the decision is yours. Every repair we complete carries a 90-day parts warranty and a 90-day labor warranty. Our founding motto dates to 1952: "Fair prices. Quality work. Every time."
Where we work around Cornelius
Cornelius sits on Lake Norman in Mecklenburg County, and we serve the 28031 ZIP code. We also serve Huntersville next door and Denver, NC, across the lake. Our full map, town by town, is on the service area page.






